- Make sure Siyata BT RSM is turned Off. Press and hold the Power button for about 10-12 seconds to power up the BT RSM to place it in pairing mode. The back LED should be flashing blue & red rapidly to show it is in pairing mode.
- On the SD7/Ultra Menu go to Network - Bluetooth and make sure Bluetooth is On (Click to Off). Scroll to Pair Device and click down on Rotary. Scroll to find Blu-PTT click down and pair that. Once it says Bonded, hold down the Rotary dial to back out of the Menu.
- Turn off the Siyata BT RSM. Then hold down the Power of the RSM for 10-12 seconds to get it back into Pairing mode (fast blinking LED on back). On the SD7/Ultra Menu go to Menu go to Network – Bluetooth. Scroll to Pair Device and click down on Rotary. Now find Siyata BT, click down and pair that. Once it says Bonded, hold down the Rotary to back out of the Menu
-
When you check the 'Paired Devices' on the SD7/Ultra, you should see both Blu-PTT (bonded) and Siyata BT (Bonded). If you do not see both, audio will not transmit out of the BT RSM correctly.
NOTE: For some PTT applications, you need to specify inside the App that it uses the BT RSM, or Audio may not transmit back and forth out of the BT RSM. Use Vysor in order to access the PTT application settings by following these directions.
ESChat PTT (Headset type: set to 'Bluetooth HSP')
Motorola/Kodiak PTT ('Call from lock screen' & 'Use bluetooth' both toggled On)